In this activity we will be printing our initials using the robot. We are going to make my initials
Step 1:
We will be going to use vr.vex.com
Step 2:
Use the Art Canvas playground
Step 3:
Setup the pen for the robot
Step 4:
We are going to add these blocks
Turn left 90 degrees
Drive forward for 300 mm
Repeat this 3 times
Step 5:
Then add
Turn right 90 degrees
Drive forward for 300 mm
Repeat this 2 times
This would make the S for my initial
Step 6:
Now we make the P
Now add the turn right for 180 degrees
Move robot pen up
Step 7:
Now we add
Drive forward for 400 mm
Turn left for 90 degrees
Robot pen down
Step 8:
Now add
Drive forward for 600 mm
Turn right for 90 degrees
Step 9:
Lastly add these
Drive forward for 300 mm
Turn right for 90 degrees
Repeat this 3 times
This is the final result
Your Task:
Make your own initials now