Using multiple LEDS

Since we have only been using 1 LED we can try using more then 1 LED in a single circuit.

Key objectives

In this project, you will:

• Create a circuit with 8 LEDS in it

• Document the results

1. Explore phase

Someone needs a circuit that requires 8 LEDS on it.

2. Create phase

Using a Breadboard, Arduino, 8 LEDS, 8 330Ω resistors and some jumper wires make the following circuit

Once the circuit is made create the following code to run through the circuit

3. Share phase

Document what happened when the code was ran through the machine you made.